1 / 2
FNIRSI LCR-P1 transistor tester Skadis holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis holder for the FNIRSI LCR-P1 transistor tester.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Skadis holder for the FNIRSI LCR-P1 transistor tester. The device is press-fit into the holder but should be fairly easy to remove. The pegs fit a bit loosely, making it easy to grab the device from the board without having to remove it from the holder; the design should allow full usage without removal.
I included the SCAD file so you can adjust the tolerances if you prefer a tighter fit on the pegs. Be careful with changing the tolerances on the holder itself; the device is front-heavy so it tips forward easily!