Gridfinity tool bin for the IWISS HSC8 family ferrule crimping tools - tested with a knock-off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 x 2 x 4 Gridfinity tool bin for the IWISS HSC8 family ferrule crimping tools. Deep enough to stack on top.
- Ocena
- 0 / 5
- Polubienia
- 164
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 1825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity bin for the IWISS HSC8 family crimping tools. Size is 5 x 2 units and 4 units high. IWISS makes crimping tools
HSC8 6-4
HSC8 6-6
HSC8 16-4
HSC8 16-6
of the same form factor, they should all fit (not tested though). I included a 1mm thin test outline that you can print to check the fit if in doubt.
Furthermore, there are tons of knock-offs on Amazon and Aliexpress which also fit. I myself have one and tested with that says "Behiruch HSC8 6-4A" on it.
I let much tolerance for the tool, about 2 mm everywhere since I don't like to fiddle with it when putting the tool in. For some of you that might be too loose, please check with the testpiece. There is also a version with no material between the grips to save filament.
The cutout accommodates the entire height of the tool. This allows additional gridfinity bins to be stacked on top.
The bin was made with Tracefinity: https://app.tracefinity.net.
My printing settings:
0.2 mm BALANCED
3 perimeters (2 might also be ok)
4 solid layers top and bottom
15% rectilinear infill
no support
Please see also my other Gridfinity tool bins, cases, and parts: https://www.printables.com/@trses/collections/3756947
If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.