Obsidian Shard D20 - display die, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chunky d20 shaped like raw obsidian. Twenty flat mesas keep the numbers safe from the rock texture.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A d20 shaped like a shard of raw obsidian: curved edges, facets of different sizes and a fractured base instead of a pedestal. It stands in the same pose it prints in, so there is no second orientation to worry about.
READ THIS FIRST: it is a DISPLAY die, not a rolling die. It tips at 14 degrees where an ordinary d20 tips at about 22, so it favours some faces. If you want it fairer there is free stability in the slicer, measured and given below
PRINT SETTINGS
0.4 nozzle. 0.12mm layers for the finish, or 0.20 mm in half the time. No supports and no raft: the worst overhang is 1.01 mm per layer. Brim yes, 5 mm, because the footprint is 116.8 mm2 for a piece 40.9 mm tall and it widens as it rises. Four walls, five top and bottom layers. Random seam: an aligned seam draws a straight line down a stone and you see it from across the room. A textured plate leaves the base matte, which is what a rock wants.