ПО-2 — Soviet Fence Faceplate for Steam Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steam Machine faceplate in the pattern of ПО-2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
Steam Machine faceplate in the pattern of ПО-2 — the precast concrete fence
that stands around every garage cooperative in the former USSR. You'll need 4 × ⌀6 × 2 mm
neodymium discs — they press straight into the printed hole, no reaming needed.
Glue the bosses into the panel pockets with CA, but dry-fit against the console
first — the flange sits loose by design and each boss has a slot that must line
up with the guide rib inside the console. Glue the magnets in as well: the boss
only stops them being pushed inwards, and the pull is outwards. Same pole facing
out on all four, or the panel hangs off two corners.
PLA, 0.2 mm layers, 2 walls, no supports anywhere.
Panel goes pattern-up on its flat back — 96% bed contact, no brim needed.
The four bosses print flange-down; keep them on the same plate as the panel
so their tiny layers have time to cool