1 / 4
HA MeshBook on Faketec — zdjęcie 1
1 / 4

HA MeshBook on Faketec

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for Meshtastic node based on Faktec v4 / v5 + OLED 1.3" + GPS + BME 280 + Buzzer + Vibra + 3 pos swith

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

HA MeshBook is a compact enclosure for a Meshtastic radio node designed to function as a seamless hardware extension of the Home Assistant ecosystem. Packed with environmental sensors, it serves as a remote data node, while its 3-way switch, display, and haptic feedback transform it into a portable, autonomous controller for HA automations (via MQTT/integrations). The enclosure features a sleek, minimalist profile with no external protruding elements and features an embossed Home Assistant logo.

Hardware Compatibility:

  • Main Board: Faktec v4 / v5, NRF52840, RA-62.

  • Screen: 1.3" OLED display.

  • Controls: 3-way switch for autonomous navigation.

  • Battery: 604060 2000 mAh  battery.

  • Sensors: BME280 climate sensor (for HA environmental monitoring) & GPS module.

  • Feedback: Piezo buzzer (with acoustic chamber)

  • RF: Internal antenna mount (features an isolated compartment).

Design Features & 3D Printing Specs:

  • Stealth LED Indicators: Special internal recesses drop the outer wall thickness to just 0.4 mm right above the status LEDs.

  • Multi-Color : You can print two-color with Home Assistant logo from 3mf file/

  • Ventilation: Dedicated micro-slots for the BME280 sensor ensure fresh airflow while isolating it from the board's operational heat for accurate climate reporting to Home Assistant.

Tagi