SD Card holder für Kondor Blue

Modular SD card holder with ARRI 1/4" interface! Expand storage capacity by simply adding extra cards.

What problem does it solve?

• This print solves the problem of storing SD cards securely, conveniently, and neatly directly on the camera rig.

• Instead of having to look for memory cards loose in your pocket or deep inside a camera bag, this model provides the following specific solutions for daily filmmaking workflow:

• Secure Retention on the Rig: Thanks to the contoured slots, the cards will not fall out even when mounted upside down or during fast movements on set.

• Loss Protection & Organization: SD and microSD cards are small and easily misplaced. The holder keeps full and empty cards organized right on the camera.

• Seamless Integration: Fits directly onto Kondor Blue cages and standard camera rigs using the 1/4" ARRI standard interface without blocking valuable accessory mounting points.

• Flexible Access: The modular plate design, which can be rotated in 90° increments, allows the holder to be configured so that cards are easy to grab even when wearing gloves or in tight rig setups.

Features

• Clever design: SD cards can be inserted into the holder in multiple positions.

• Universal standard: Compatible with standard 1/4"-20 camera screws and tripod threads.

• KondorBlue Standard: 1/4" ARRI interface, the system can also be upgraded to ARRI 3/8" interfaces.

• Modular design: Plates can be mounted rotated 90° for maximum positioning flexibility.

• Variants: Plates can be modified to accommodate microSD cards.

• Safety: The SD cards are held in the tray so they cannot fall out (the holder can also be used upside down).

• Flexibility: Other mounts can be screwed onto the mounting block.

• Accessibility: Screw the plates together alternately rotated by 90° to create more space for gripping or to create more order.

• Metal construction: The entire assembly can be made of metal for maximum durability.

• Support-free design: All parts are printed flat on the print bed, eliminating the need for support structures.

Print Information

For maximum layer strength and mechanical durability, follow these settings:

• Material: PETG,(Recommended for flexibility & mechanical strength). PLA works well if the threaded end is not used.

• Layer Height: 0.2mm

• Perimeters: 4

• Infill: 30%,

• Supports: NO (Designed support-free)

• Orientation: Print all parts flat on their default bottom face.

Hardware & Assembly

Happy Prototyping