DIY Jewelry box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As it is a box for jewelry, it can be a nice gift for your girlfriend, wife or mom.
- Ocena
- 4,667 / 5
- Polubienia
- 190
- Pobrania
- 534
- Wydruki
- 3
- Wyświetlenia
- 3590
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution
As it ss a box for jewelry, it can be a nice gift for your girlfriend or your mom.
I suggest to print the "Top Cover" at a standing position (at low speeds) as it has small details - also put a raft below it to have enough build plate adhesion.
The "Base" can be printed upside down - it is optional. You can calculate the amount of support needed in both position.
The "Leg" and the "Buttons" are small so don't print them 1 by 1.
As i drawed the model with tight tolerances the physical part can be too tight and the drawers will move hardly - as an option you can try to resize the drawers or sand them until it will move freely.
For the assembly i used epoxy, to glue them together.
Category: Jewelry