Reolink Argus 3 Pro Camera Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reolink Argus 3 pro cover to make it look more stealthy
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Camera Cover/Stealther for the Reolink Argus 3 Pro (may fit others with similar casing?)
Wanted the white camera to be a bit less in your face/noticeable in our "secure" basement garage. A black cover makes it less obvious amongst our garage clutter, and harder to see past the perforated mesh of the garage door.
Printed in PLA because it is staying in a cool underground garage, but obviously if using outside you want something UV/heat resistant.
It fits by just a small amount of pressure and the tabs on the back stop it from going too far.
Does not interfere with the screw mounting mechanism.
Also handily the flat bottom means you can stand it on a shelf if you want without it rolling over.
If you wish to remix this project, a Tinkercad share link is here: https://www.tinkercad.com/things/8OfaT3Q6ntr-share-link-reolink-argus-3-camera-cover?sharecode=8wnk5SkJT-nqphb_ziiZ0_ISxfDEQ4NjpPDob4P9VWo