ATX PSU Breakout Board Mount Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of lynn_pheonix's ATX breakout board mount. I found dimensions for the mounting holes for the ATX…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of lynn_pheonix's ATX breakout board mount.
I found dimensions for the mounting holes for the ATX breakout board I bought differed a bit from the original, being 75mm centre-to-centre on one axis and 67mm on the other axis.
I also wanted screws holes on both sides and for them to be designed for 6G x 9mm self tapper screws as I wanted to mount it on some MDF board.
To complete this you will need:
- 4 x M3 x 5-8mm screws
- 4 x 6G screws of desired length
The M3 screws need to tap the thread to hold the breakout board on the mount, so do this carefully the first time.
I have included the Fusion 360 file and a .step file for those that want to tinker.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20-25%
Filament: eSun PETG Solid Orange
Category: 3D Printer Accessories