Ender 5 Raspberry Pi v2.1 v-slot extrusion clip-on camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted an easy way to mount a Raspberry Pi v2.1 camera on my Ender 5 Pro. Some of the existing designs were quite…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted an easy way to mount a Raspberry Pi v2.1 camera on my Ender 5 Pro.
Some of the existing designs were quite nice, but their mounting mechanisms were very heavy duty for the light weight Pi camera module, which also limited their placement.
I was inspired by a comment by JonathanMurray and decided to remix my Monoprice Mini Select v2 camera design with the clip from the Ender 5 Light Mount by byxqqqqme.
While this was designed with an Ender 5 in mind, it should work with anything that uses 2020 v-slot extrusions.
As with my Monoprice design:
- I took inspiration from willywidget's Raspberry Pi Camera Case with its bottom-back exit for the ribbon cable.
- I really liked monkeylabs' Ball Joint with Tension screw but the design was not manifold, so I repaired it.
You will also need to print:
- the ball joint (BallJoint.stl) from 3dkarma's design
- two links from 3dkarma's design of your desired length
You will also need a couple of M3 screws:
- 2 x M3 15-16mm screws and nuts for the links
- 1 x M3 25mm screw and nut for the ball joint holder
I have included Fusion 360 files for all the items I designed, remixed or repaired for those that wish to tinker.
Enjoy! Print Settings ==============
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
20-25%
Filament: eSun PLA+ Silver
Notes:
Category: 3D Printer Accessories