Ather Rizta Horn Switch Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horn Switch Extension for Ather Rizta. Printed as a 2 piece part which are joined together and slid over the horn switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Horn Switch Extension for Ather Rizta scooter.
Printed as a 2 piece part which are joined together and can be super-glued if needed. Then just slide it over the switch. You can slide as much as needed to give variable length of extension. (You might also scale the main body vertically in the slicer if longer or shorter version is needed)
Note : Mine is a basic DIY printer so the finish looks crude as layer lines are visible and overhangs dont print very well.
Post-Printing
Join both the parts preferably with super glue.