Magnetic 3D Scanner Markers (5x1mm Magnet Slot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic 3D Scanner Markers (5x1mm Magnet Slot)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — NoDerivatives
Improve your 3D scanning precision and workflow with these easy-to-print tracking markers!
Designed specifically for 3D scanning, these markers feature a precisely measured recess on the back to fit a 5mm x 1mm neodymium magnet. This magnetic design allows you to quickly attach and remove the markers from metal objects, car parts, or magnetic surfaces without using messy adhesives or stickers.
Key Features:
Perfect Size: Optimized for reliable tracking by most standard 3D scanners.
Magnetic Slot: Designed to perfectly fit a standard 5mm x 1mm magnet.
Reusable & Eco-friendly: Stop wasting adhesive dots! These can be used over and over again on metallic surfaces.
Easy Assembly: Simply press-fit or use a tiny drop of superglue to secure the magnet in place.
Recommended Print Settings
Layer Height: 0.12 mm - 0.16 mm (for better top-surface detail)
Infill: 15% - 20%
Supports: None required
Adhesion: Skirt or Brim (if you are printing many at once)
Material: PLA, PETG, or ABS
Tip: If you want to completely hide the magnet, you can add a "Pause at Height" command in your slicer just before the hole closes, drop the magnet in, and let the printer seal it inside!