Hd6xx Hd58x Jubilee Closed Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a back piece designed for the HD58x Jubilee, but should work on any of the HD6 line, that turns this headphone…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a back piece designed for the HD58x Jubilee, but should work on any of the HD6 line, that turns this headphone from an open back to a closed back.
I have included a version with and without the sennheiser logo as depending on how you print the model it can come out quite rough if using supports on the logo side.
I would recommend putting some kind of damping, for example cotton, in the back of these to absorb rear waves from the drivers, to make them less closed sounding.
Edit:
Featured here, modified, on the YouTube channel "DMS": https://youtu.be/Wj8r7p_Cx3A
Compatible with: Hd58x Hd6xx
Category: 3D Printing