Pantera 1990-2003 Name Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vulgar display of power! Pantera's iconic 1990–2003 groove metal logo plaque with trim or standard border options.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Get ready to dominate! This 3D display plaque features the heavy, western-infused serif typography of Pantera during their prime 1990–2003 era (Cowboys from Hell, Vulgar Display of Power, Far Beyond Driven).
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Border & Framing Options Included:
To fit your preferred wall display aesthetic, this model comes with two distinct border styles:
Trim Border: A tight, form-fitting outline trace that follows the exact profile of the lettering—giving the design a slim, raised white stroke outline around black lettering.
Standard Border: A solid backing frame with a wider offset margin around the text for maximum contrast and rigidity.
Easy Multi-Color Printing:
Both versions feature defined z-height steps between the base plate and raised lettering, allowing you to easily perform a simple slicer filament swap to achieve a high-contrast two-tone print!
Dimensions
Trim Border:
Border Width: 9.2”
Border Height: 3.2”
Border Thickness: 5.625”
Text Width: 9”
Text Height: 3”
Text Thickness: 0.5”
Text Inset: 0.0625”
Total Thickness: 0.5625”
Standard Border:
Border Width: 9.4”
Border Height: 3.4”
Border Thickness: 0.125”
Text Width: 9”
Text Height: 3”
Text Thickness: 0.375”
Total Thickness: 0.5”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws or small finish nails for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles and crisp serifs of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Looking for the early glam/heavy metal logo?
Check out my companion listing here:
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: