Mini emergency button box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy enclosure for a mini 16mm emergency button, such as: AliExpress:…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a sturdy enclosure for a mini 16mm emergency button, such as:
AliExpress: https://s.click.aliexpress.com/e/_c3ilk3eF
Amazon: https://amzn.to/3UbnfvV
Required Hardware
4× M4 OD 6mm threaded brass inserts, such as:
AliExpress: https://s.click.aliexpress.com/e/_c45zlgg3
Amazon: https://amzn.to/4gLCUdW
4× M4 screws, 8–20mm long, such as:
AliExpress: https://s.click.aliexpress.com/e/_c3xgr5zv
Amazon: https://amzn.to/4zOTKR1
Mounting & Wiring
The bottom of the box has holes for mounting and passing the wire through. These holes are covered by a single thin layer, so they can easily be drilled or punched out as needed.
There is also a hole on the side for wiring.
Optional Silicone Feet
If you want to use the enclosure on a flat horizontal surface, there are also four recesses for 8mm-diameter silicone pads:
AliExpress: https://s.click.aliexpress.com/e/_c3nHzr6F
Amazon: https://amzn.to/4i636kX
One More Thing...
Turns out this is also a great fidget toy!
All the links are affiliate.
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.