ARTMS Lightstick Accessory Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A display piece for holding the various ARTMS lightstick accessories released for each tour
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to look a little like wings, this stand will hold two of the various lightstick accessories that ARTMS release for each of their tours. Pairs well with my ARTMS lightstick stand.
Modhaus redesigned the attachment from Grand Club Icarus onwards to make them much easier to fit to the lightstick, so I have included two models. The "old style" model should fit all of the accessories, but the "new style" model will hold the new design better. The old design won't fit well in the new style model in my experience.
You can easily mirror the STL in the slicer to print wings for the other side to add more in the future, or if the other direction works better for your display!
Designed with 0.25mm layer height and 0.4mm nozzle in mind.
I have included the rough 3MF project file of the new style model with a brim on the base to help with adhesion. It uses a negative modifier of the model to make the helper disk behave more like a brim and make it easier to remove (instead of adding a brim to the whole model) - Make sure to replace both the model and negative modifier if printing the old style model.