1 / 1
Runeblade - Glowing Rune Fantasy Sword (Cosplay Prop) — zdjęcie 1

Runeblade - Glowing Rune Fantasy Sword (Cosplay Prop)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fantasy longsword prop with deep-engraved runes and a gem crossguard, ready for LED backlighting.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Runeblade is a display and cosplay fantasy longsword with deep-cut rune channels running the full length of the blade and a faceted gem set into the crossguard. The runes are modelled as recessed troughs rather than surface detail, so you can either paint them for a flat finish or drop in a 5 mm LED strip or fibre optic run for a proper glow.

Overall length is roughly 900 mm when assembled, and the model is pre-split into blade, crossguard, grip and pommel sections with keyed alignment pins so it fits a 250 mm bed. Print the parts flat and glue them on a 6 mm steel or carbon rod down the core for stiffness.

Print settings

Layer height: 0.2 mm (0.12 mm on the rune faces if you want crisper edges)

Perimeters: 4

Infill: 10-15% gyroid, or 25% in the grip and pommel for balance

Supports: only under the crossguard wings, everything else prints flat

Material: PLA for display, PETG if the prop will see stage or convention handling

Seam: rear, aligned to the spine of the blade

Finishing

Sand the blade faces to 400 grit, two coats of filler primer, then a gunmetal base with a dark wash pulled into the recesses. Mask the rune channels and spray them gloss white before adding translucent blue, so the LED light reads evenly. Wrap the grip in leather cord or print the included wrap sleeve.

Notes

This is a prop with a blunt, rounded edge and is not intended as a functional weapon. Check your local convention and event rules before carrying it. If you print one, please post a make photo - I would love to see the paint jobs.

Released under CC BY-NC-SA: remix and print freely for personal use, credit the original, and no commercial sales of the files or prints.

Tagi