Quanli Gorilla 6558 Trinocular Microscope Swing out Polarizer LED Lamp

Quanli Gorilla 6558 Trinocular Microscope flip out Polarizer light. Wanted a solution to mount a Polarizer light on my Microscope.The unique way this scope is setup with the Barlow lens, Thermal Camera, and UV lamp makes mounting any polarizer difficult. Looked at magnet mount and swing out, both had benefits and drawbacks. Ended up testing the one I started with and like how it works. Can swing left or right, and the hinge bolt can be used without the nut for easy removal. With a .5x Barlow you do get some Vignetting on the outside edge, but for seeing through reflections or reading number on an IC it is worth it. It can begin to hit the focus knob when you are racked high, but the bevels on the top of the ring will push it out of the way. With my bench setup and the Mechanic DVS-1 Swing arm it works perfect, and works well on the factory mount. This is designed for the Ifixes IL37 96 LED polarizer light:

 https://www.amazon.com/dp/B0DHZQL917?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

I will be making a ring for the Mechanic LED light as well. Between the 2 I like the light on the 96led as it is much brighter than the mechanic, the draw back is the fixed cord, and the center lend pops out, so I designed the swing out ring to hold it in place. The Mechanic is not that bright but it does work well, and I like the removal able USB cord. I may make a magnetic attachment for the Mechanic since the USB can be run off the 6558 scope body. Once I get the mechanic one back I will look into doing that.

Parts List:

M5x25 Cap HeadX1Hinge Bolt
M5 Hed NutX1Hinge
M4x6 Button Head X2Side Bolts
M3x16 Button Head X2Bottom Bolts
M4x8 Heat Insert or 8mm spacer for 3mm Bolt for bottom bolts
M3X8 Pan HeadX3 Polarizer Ring

Basic Printer Settings:

Printed on Creality K1C on Rooted on Klipper
.4mm nozzle
.16 Layer Height
5 Wall Loops
5 Top Shells
5 Bottom Shells
20% Gyroid Infill
No Supports needed

For Owners of the Quanli Gorilla 6558 Microscopes

Also Have custom Linux software for the Quanli Gorilla Thermal camera on Github:

https://github.com/n6dlh/Quanli_Gorilla_6558_thermal_camera_linux

Scope Caps: