Off The Shelf - 80s ska band 3d logo for single filament printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,76 € – 3,37 € netto (bez VAT)
Dla pliku: Off The Shelf 3D DA model_0.2mm_PLA_MK3S_3h5m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,06 € netto (środek widełek).
- Masa podana przez autora
- 38 g
- Czas druku podany przez autora
- 3,08 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
1980s Sydney (Australia) based ska band "Off The Shelf" - 3d poster logo. Colour changes built in.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
1980s Sydney (Australia) based ska band "Off The Shelf" - 3d poster logo.
My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks.
UPDATED VERSION: Off The Shelf 3D DA
Removed black from interior of letters to see them clearer
size increased by 10%
layer thicknesses updated = top/black layer thinner now.
Colour/layer changes built in.
This logo is based on the pole/gig poster design used in the 80s.
Note that the corner locating pins are NOT printed. They are hidden with negative space. They're just an artefact of building the layers and locating them accurately.
Suggested colour order can be seen in the GCODE viewer/preview.
I used:
Layer 1 (background) - White
Layer 2 - yellow
Layer 3 - green
Layer 4 - red
Layer 5 - black