Makera Z1 dual probe holder (laser probe + 3D touch probe)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A probe holder that can hold both the stock laser height probe, as well as the 3D probe! (plus a few accessories)
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 177
- Wydruki
- 4
- Wyświetlenia
- 654
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I mostly use the 3D touch probe on the makera Z1, so i designed a probe holder that can hold both the laser height probe, as well as the 3D probe.
Be careful when installing the screws, the spindle cover does not have metal inserts, so over tightening the screws can strip out the plastic.
I also included a wire management clip that can handle both wires, as well as a small cover that you can use to cover the unused probe connector to avoid metal chips from finding its way into the contacts!