Fisher Paykel Spline Driven - 479318P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tub Dog Clutch - 425080
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Fisher Paykel Spline Driven - 425080 or part of kit 479318P. Half of the dog clutch in the center of the was basket.
Needs to be printed out of something tough,like PC-GF in my case, but PA6, PA12 etc should work as well.
For PC-GF I used 10 Wall Loops, 10 Top shell Layers, Top shell Thickness 1mm, Infill Adaptive Cubic.
Speed was slowed right down to 80 on the walls and 100 on the infill, 60 for top surface.
Tree supports were used and note the orientation in the pics as this keeps all the fitting sections clean from support cruft.
It's done a few loads and is working well.