1 / 2
ZWIFT Ride Seat Clamp foreward mod +60mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zwift Ride seatclamp foreward modification by +60mm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Modifying the Zwift Ride saddle mount allows you to move the saddle position forward by +60mm.The original saddle clamp can be fitted to the 3D-printed part.
You will need to press 2x 2pcs. M6 threaded inserts into the printed part so that you can screw it into the original Zwift Ride seat post.
Filament: PA (poliamid)
Number of walls: 10
Fill volume: min. 55% (Gyroid)