Exhaust Duct for Two-Hose Monoblock Air Conditioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled exhaust duct for two-hose AC, bolt to foam board, directs hot air upward, away from the fresh-air intake
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This exhaust duct is designed for two-hose monoblock air conditioners.
The overall outlet geometry is roughly comparable in size to the common oval window outlet adapters used with 150 mm air conditioner hoses, making it suitable for typical 150 mm exhaust hose setups.
The outlet is deliberately angled upward, directing the hot exhaust air upwards. This helps prevent the discharged warm air from being immediately drawn back into the air conditioner's fresh-air intake, improving cooling efficiency.
Mounting
The exhaust duct is designed to be bolted directly to a rigid foam board used as a window insert.
The duct is mounted on the outside-facing side of the foam board, while the exhaust hose from the air conditioner is connected to the inside-facing side. The foam board therefore acts as a simple window adapter.