1 / 4
dichtol Lid Opener – for 250 ml & 1 L — zdjęcie 1
1 / 4

dichtol Lid Opener – for 250 ml & 1 L

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable dichtol lid opener for 250 ml and 1 L – more leverage, easier opening of stuck lids.

Ocena
5 / 5
Polubienia
2
Pobrania
4
Wydruki
1
Wyświetlenia
21
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Is the lid stuck? No problem.

If you use dichtol regularly, you may have experienced this: After use, you reseal the container—and the next time you need to open it, the screw-on lid is noticeably tighter. Especially when there are small amounts of product residue around the seal, opening it by hand can quickly become a hassle.

That’s exactly why we developed the dichtol Opener.

It’s a 3D-printable lid opener specifically designed for the dichtol screw cap, which fits snugly around the cap and provides significantly more leverage when opening thanks to its long handle.

A small, simple tool for a problem we’ve encountered ourselves through use and feedback from our community.

Fits 250 ml and 1 liter bottles.

The dichtol opener is compatible with:

  • dichtol 250-ml containers

  • dichtol 1-liter containers

Both sizes use the same cap and can therefore be opened with the same opener.

Why We Developed the dichtol Opener

We’ve repeatedly seen in our community and through various feedback that, after use, dichtol bottles can sometimes only be opened with considerable effort.

Rather than letting this become a constant annoyance, we designed a solution that’s as simple as possible — and are making it available here for you to print yourself.

Easy to Print

The provided print file works great with PLA and is therefore suitable for hassle-free printing on virtually any standard FDM 3D printer.

Of course, the model can also be printed with other common filaments, such as PETG, ABS, or ASA. We recommend using a Gyroid infill with a density of at least 10%, as specified in the print file.

The design is intentionally kept simple and functional: minimal effort, practical use, and easy to reprint at any time.

Usage

Simply place the Dichtol opener completely over the screw cap so that the inner contours engage neatly with the cap.

Then loosen the cap using the extended handle.

Thanks to the large contact surface and the additional leverage, force can be applied to the cap much more comfortably than when opening it by hand.

Note: When handling dichtol products, please continue to follow the product’s respective handling and safety instructions. The opener is intended solely as a mechanical aid for opening and closing the cap.

Tagi