TFT35-E3 Mount for Cr-10S Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a remix of my TFT35 v3.0 mount for Cr-10S Pro/Cr-10 Max. The mount plate is inserted inside the base of the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix of a remix of my TFT35 v3.0 mount for Cr-10S Pro/Cr-10 Max. The mount plate is inserted inside the base of the printer and is attached with the notch toward the top of the printer using the original mounting hardware for the Creality touchscreen. The mount is attached to the mount plate using 4 M3x5 (or up to M3x8) screws. The TFT35-E3 is attached inside the case with 4 M3x5mm screws. Cables are attached to EXP1, EXP2, and RS232 (for the touchscreen) and the case is inserted into the mount and attached with 4 M3x5mm screws.
UPDATE: I have been informed that the profile of this mount is too tall for the Cr-10 Max.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20
Filament: Sunlu PETG Red
Notes:
Support is needed for the mount from the buildplate, and is optional for the case and mount for the USB and SD card openings.
Category: 3D Printer Parts