Ender 3 TFT35 V2.0 Left-side Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A left-hand mount for a TFT35 V2.0 on an Ender 3. Can be used with the mount alone using M3*8 screws & nuts, or with…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A left-hand mount for a TFT35 V2.0 on an Ender 3. Can be used with the mount alone using M3*8 screws & nuts, or with the back cover, which is designed to use M3 brass inserts. If there's any interest, I can modify the design for right-hand mount and/or remove the logos.
Update 6/12/19: Added files for inlaid letters for Creality and BIQU logos. Also, minor tweaks to mount file to improve fit.
Update 7/12/19: Trimmed inlays for improved fit. Reprinted with inlaid logos. The appearance is much better.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.4
Infill:
20
Filament:
Inland PLA
Notes:
Prints OK without support.
I filled in the debossed logos on the mount using a 3D pen and finished it using a rotary tool with a sanding drum. I used a soldering gun to press-fit the brass inserts. (See https://www.youtube.com/watch?v=KUEFhiFB6Zs)
Category: 3D Printer Accessories