Mafell MT55cc - osVAC neo M32 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement dust port for the Mafell MT 55 cc with a direct osVAC neo M32 connection.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This replacement dust port adds a native osVAC neo M32 connection to the Mafell MT 55 cc plunge saw.
Instead of attaching another adapter to the original dust outlet, this part replaces the complete factory dust port. It uses the original mounting interface and provides a compact, integrated connection for hoses equipped with an osVAC neo F32 coupling.
Features
Designed for the Mafell MT 55 cc
Direct osVAC neo M32 connection
Replaces the original Mafell dust port
Compact design without an additional push-fit adapter
Retains the original angled outlet and rotating mounting arrangement
Full internal airflow path
Safety
Disconnect the saw from the power supply before replacing the original dust port. Check that the printed part rotates freely, locks securely and cannot contact the saw blade before use.
Printing
Orientation: upright, as oriented in the provided STL file (upside down compared to the photo)
Supports: not required – prints cleanly without supports
Material: PETG recommended; other tough, temperature-resistant materials such as ASA or PA also work
Credits
This design was strongly inspired by and created with the help of:
Many thanks to both creators for publishing their work and making this project possible.
This is an independently created accessory and is not affiliated with or endorsed by Mafell or the osVAC project.