1 / 1
Matchbox Teleporter — zdjęcie 1

Matchbox Teleporter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small object vanishes from a closed box in the audiences hands, and re-appears in yours.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

BOM

  • Printed coin catch

  • Empty pocket matchbox, these are roughly 50mm by 35mm

  • A coin that fits the catch, either real or printed

  • The cut out bottom of a second matchbox tray, a piece of cereal box works too.

The Effect

A coin goes into an ordinary looking matchbox. It rattles convincingly when shaken, even in someone else's hands. After a few shakes, the sound stops. The box can opened by the audience member to reveal the coin is gone. The coin is then revealed to have moved from the box to your hand.

Print Settings

This is a thin, flexible print, so bed adhesion is the primary challenge.

  • Printing in lower layer heights is helpful

  • Use a small outer brim

  • PETG recommended, PLA works too

Construction

  1. Empty the matchbox

  2. Seat the printed coin catch inside an emptied pocket matchbox tray.

  3. Place your coin into the wider zone of the catch.

  4. Press a piece of thin card down over the top to conceal the mechanism.

  5. Slide the tray back into the sleeve.

Performing the Trick

  1. Present the matchbox - Show everyone it's empty when you begin the trick

  2. Pretend to place a coin in the box - Use a French drop to keep the coin in your free hand or place the coin under the thumb of the hand holding the matchbox. You can sell this a little better by using the coin in the false bottom to make a noise as if the coin was placed.

  3. Shake it yourself first - hold the short ends of the box firmly closed, then audibly shake the coin to show that the coin is in the box. It takes a little practice to shake it without letting it get trapped in the catch.

  4. Hand the box to an audience member - instructing them to hold the short sides closed exactly as you did. Ask them to shake it. They'll only manage a moment of audible rattling before the coin locks silently into the catch mechanism, appearing to have vanished.

  5. Have them open the box themselves - The box is legit looking enough to survive inspection, ask the audience member to open the box up and tell everyone if it's empty.

  6. Reveal the coin in your hand 

Remixing

https://www.tinkercad.com/things/4dO0ArtBpiW-matchbox-teleporter?sharecode=NfDR_xpun0878qXV29b1v9UuNw2FNBh6rPtGAm6A5tw

I didn't have access to other currencies coinage when making this. If you'd like to try it out with your own currency, you can change the size of the negative cylinder to match your coin and then merge everything to make a new frame.

Tagi