Sprinkles/Hagelslag box holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These simple holders keeping your cupboard clean and catches sprinkle dust,
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sprinkle / Hagelslag challenge
Many sprinkle cartons leave behind small powdery dust - IN YOUR CLOSET.
And that's where it should not be so I designed an easy-to-print, easy-to-use
2-sizes tested with 5 different brands. They all seem to use the exact same size (or come from the exact same factory :-)
Snug fit. Stick on the box and won't fall out.
Printing
Supports: not needed
Filament: PLA, ~25 grams
Nozzle: 0.4mm
Layer-height/profile: 0.2 mm
Time: ~50 min for Prusa Mini, - way faster for newer models)
BTW, the model was designed by me, the front-picture on this page was created by AI.