Combat Robot Wheel Mold (Antweight 22mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A grippy 22mm wheel mold for 150g antweight combat robots, easy to scale up for larger classes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mold pours a 22mm silicone wheel sized for the antweight (150g) combat robot class. Every wall carries a slight draft angle so the cured wheel pops free clean, and anchor holes molded into the hub insert lock the silicone to your hub instead of letting it spin loose under impact.
Run a lower Shore hardness silicone, around 15A, for a soft, high-grip wheel built for the traction a battlebox floor demands. Scale the mold up in your slicer for a bigger wheel and the same design principles hold: keep the draft angle, keep the anchor holes, adjust your pour volume to match. That makes this file a solid starting point for beetleweight and larger combat classes too.
Files included: the premade 3MF file, ready to print. Want to edit the design yourself? The STEP file is available on my shop.
Specs:
Finished wheel diameter: 22mm
Print material: PLA for the mold, PETG or PCTG for the hub insert
Recommended silicone: Shore 15A for max grip
Fasteners: M3 machine screws (12mm) and M3 square nuts (low profile)
Full pour and demold process: How to Pour Your Own Silicone Wheels