Table saw dowel maker (small diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table Saw Dowel Maker inspired by the youtube channel GRINwood
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I saw the youtube channel GRINwood make a dowel maker for a table saw, so I made a 3d printable version of it.
You need two M8 bolts to hold the cutter and guide blocks in the jig, and to tap the holes for M8 in the side of the jig.
You can use a 12-point socket to hold the square stock in your drill, I found that a 16mm socket will hold a 13mm piece of square stock.
I made only Ø12 blocks as that is what I needed, you can easily make them according to the video from wood, or design your own ones using the fusion project I added as a file.
Important:
As the jig is clamped to your table saw fence, please print the right side of the jig with 100% infill, you can add specific print settings for the right side in prusaslicer, or just use the gcode I have attached for the Core One / +
See this video from the GRINwood channel for how to use it: