Printbed Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PLEASE READ THE PRINT INSTRUCTIONS!
TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS!
After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be more sharp too...
——————————————————
This is a print bed scraper remix from Luked's original one. I created a similiar version with some smooth edges and different dimensions. Also the original part made by Luked had some mesh errors which caused some strange lines on the printed part.
Print instructions
Category: 3D Printer Accessories
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,07
Infill: 10%
Filament: Prusament PETG Jet black
Notes:
I printed it with high detail (0,07mm) because this makes the shaper more stable and it looks smoother.
After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be more sharp too...