Hal9000 Framework Laptop 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hal9000 case for Framework Laptop 12 motherboard
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Hal9000 style case for a framework laptop12 motherboard.
The case is designed to be used with USB-C extension cables, which can be attached to the front and back.
The power button with a lever system is located on the front of the case.
The motherboard must be secured to the side panel with the supplied M2 screws, after inserting the inserts into the appropriate supports.
Cut two pieces of 2 mm aluminum rod to a length of approximately 10 mm and place them in the joints of the button-lever system.
To close the case, use M3 wood screws no longer than 10mm.
Assembly Requirements:
N.4 USB-C panel mounts https://a.co/d/01HoeaGJ
N.5 M2 threaded inserts https://a.co/d/0appdhEw
N.10 M3x10mm small wood screws https://a.co/d/0aCXWKYe
N.1 2mm diameter aluminum round rod https://a.co/d/0j4Ztkgj