Battery Cover / Handle - Etekcity LaserGrip 800 Infrared Thermometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for a lost battery cover/handle component.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I acquired an Etakcity Lasergrip 800 infrared thermometer with a missing battery cover (which is also part of the handle - see photos).
Assembly and Use
There are two "buttons" on the inside bottom of the cover, which fit into dimples in the bottom of the thermometer handle; the dimples have downward facing grooves to help the buttons slide into the dimples. Once the buttons have been fitted into place, the cover will swing up and lock into place with two other "mini-buttons".
To open for battery removal or insertion, grip the top of the cover and pull and swing open.
Print Instructions
Print in PETG* using the 3mf files provided, otherwise :
0.2mm layer height
3 perimeters
no infill
brim
*PLA would work for this I suppose, but I recommend PETG or another high melting point filament. I used transparent green PETG just for fun.
CAD
The OnShape 3D CAD files for this are here :