1 / 2
70° DN50 / R50 Cyclone Elbow with osVAC neo M32 Connector — zdjęcie 1
1 / 2

70° DN50 / R50 Cyclone Elbow with osVAC neo M32 Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact 70° DN50 elbow with an osVAC neo M32 connection, designed for Dust Commander-style cyclone separators.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This 70° elbow was designed to connect a DN50 cyclone separator outlet to an osVAC neo M32 vacuum hose system. It is optimized for the commonly available Dust Commander-style cyclone separators and their compatible Chinese clones.

Unlike a conventional adapter that uses a short and abrupt diameter reduction, this design distributes the transition from DN50 to M32 continuously across the entire bend. The cross-section is gradually reduced along the curved airflow path, creating a smoother transition with less turbulence and fewer sudden changes in flow velocity.

The 70° bend provides a practical balance between installation space and airflow performance. It avoids the sharper change of direction caused by a conventional 90° elbow while still routing the vacuum hose away from the cyclone in a compact setup. This helps to maintain smoother airflow and reduce unnecessary pressure losses.

On the cyclone side, the adapter includes two functional details:

  • An integrated stop ring limits the insertion depth and prevents the elbow from sliding too far into the cyclone outlet.

  • A dedicated groove can accommodate a sealing ring or O-ring, helping to create a secure and airtight connection.

Features

  • 70° airflow-friendly bend

  • DN50 cyclone-side connection

  • osVAC neo M32 hose connection

  • 50 mm outer bend radius (R50)

  • Gradual diameter reduction throughout the entire bend

  • Integrated insertion stop on the cyclone side

  • Groove for an optional sealing ring or O-ring

  • Designed for Dust Commander-style cyclone separators

  • Compact shape for installations with limited vertical clearance

The adapter is particularly useful when the cyclone is installed underneath a workbench or inside a dust-collection cabinet, where a standard 90° elbow may be too tall or cause a more restrictive airflow path.

Printing

Officially optimized for 5-axis printers.

Unofficially also compatible with the rest of us, thanks to supports.

  • Orientation: large DN50 side down, as shown in the photos and in the provided print file

  • Supports: required – including inside the bend. Internal supports are recommended for a clean, smooth inner surface and the best airflow

  • Material: PETG works well

  • Remove all support remnants carefully and smooth the inside of the bend if necessary, so the airflow path stays as clean as possible

Credits

The osVAC neo M32 connector geometry is based on:

Many thanks to TOKENIZER and the osVAC community for publishing the connector geometry and making compatible workshop accessories possible.