Adimlab Gantry Electronics Box Front Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new front plate for the electronics box of the Adimlab Gantry. I added two 4010 fan mount points to the front. Uses…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A new front plate for the electronics box of the Adimlab Gantry. I added two 4010 fan mount points to the front. Uses the 4 stock mounting screws and nuts to mount the new front plate.
There's also a 'slotted' version. It is originally intended to fit the "2020_holder-_HIGH_version.stl" of https://www.thingiverse.com/thing:3994896/files
The photos are of the slotted version. I use it so that I have the option of picking up my TFT screen and holding it like a phone. You may want to enable ironing if you want a nicer surface than mine!
Tinkercad link: https://www.tinkercad.com/things/4TySCePNNE5
Print Settings
Printer:
Adimlab Gantry
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
10
Filament:
MG Chemicals PETG
Black
Notes:
For the slotted version, use supports everywhere (not just touching build plate). It's not to hard to cut the supports out of the slot with a paring knife.
Category: 3D Printer Parts