Jersey Jack Pinball GNR Camera Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera Shield to block out excess light
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
This Shield is used to block out excess light if you have a mod to fully light your backboard around the edges. i used to get flares on the highscore photo that was taken by the game at the end of the game. This prevents those flares from occuring.
I made this myself and happily share it with the pinball community.
Note: i believe from when Jersey Jack added their own edge lighting on the monitor (starting with Elton John) they have their own shield system in the game and you don't need this.
to install just unscrew the camera screws and remove the old shield and slide this over the camera and use a screwdriver thru the holes on top to screw the screws back to install the shield and camera in one go.
Happy plays pinballers!!!!