1 / 6
Castle Wrastle Strategic Board Game (2 players) — zdjęcie 1
1 / 6

Castle Wrastle Strategic Board Game (2 players)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An engaging strategy board game for 2 players where players try to capture the opponent by surrounding/leaping on them.

Ocena
0 / 5
Polubienia
4
Pobrania
3
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Background

Castle Wrastle is a challenging and engaging 2-player strategy game. Players build turrets for a castle, move between turrets and try to capture the opponent by either leaping on them from a higher turret or surrounding their turret with at least 4 barriers (either rope or wood). Players connect turrets with either rope or wood bridges and block access to turrets using either rope or wood barriers. All of the pieces are stored in a sturdy 2 piece case/cover that has a convenient locking carry handle. The bricks slide onto vertical supports and the bridge/barrier pieces are stored in 2 carriers that have retaining pins to secure them for travel. Feel free to alter the game play and rules to suit your own imagination. This is not an original idea and was adapted from other hex board games. This game is for personal use and not for commercial sale. Have fun!

Printing

I printed this model on an OPXL5H using PETG, but there are no constraints on the type of filament used, layers, perimeters or other attributes. The only physical assembly required is gluing the case top handle to the case top. Immediately after placing the handle on the top be sure to insert the retaining pin to ensure alignment.

Quantity of parts required
  • 60 bricks (that build turrets)

  • 15 rope bridges

  • 17 rope barriers

  • 5 wood bridges

  • 5 wood barriers

  • 2 unique player tokens

  • 2 bridge/barrier carriers and their associated retaining pins

  • 1 each retaining pin, lock pin, case top, case bottom

Game mission

Capture your opponent by
  1. Trapping the scoundrel on a turret (by surrounding their occupied tower with at least 4 barriers)

  2. Leaping on the rascal from a taller turret

Terminology
  1. Bricks are stacked to form towers

  2. Bridges connect (at least 2) towers and allow players to move between towers

  3. Barriers connect (at least 2) towers and block users from moving between towers

  4. Rope bridge pieces can be over-ridden, wood bridge pieces are permanent

  5. Rope barrier pieces can be over-ridden, wood barrier pieces are permanent

Gameplay
  1. Player with the longest nose goes first. If it's a tie, or someone always goes first, make up your own rule.

  2. All brick/barrier pieces are placed face down in a draw pile, but are placed face up on player turn selection

  3. Each player starts with 2 bricks and 2 bridge/barrier pieces from the draw pile

  4. The first player, on first turn, must play at least 1 brick (to build a turret)

  5. If a tower is surrounded by 4 barrier pieces it is considered blocked and can only be unblocked by over-riding a rope barrier piece (if already in place) with a wooden bridge

  6. Before the end of a turn, the player must place their token on a non-occupied (and non-blocked) turret at the same level or lower than their previous turret location

  7. Player can place as many bricks/bridges/barriers as they want per turn

  8. Player can move their token only once, and to an adjoining turret, per turn

  9. After the first turn, all bricks/bridges/barriers must connect to already played pieces

  10. At the end of each turn, the player selects 2 bricks and either 1 or 2 bridge/barrier pieces (to replenish their hand to a total of 2 bridge/barrier pieces)

  11. If there is no rule to suit your game play, make one up! Post them in comments to share with others.

Tagi