1 / 5
kidtrax power ride on kids toy replacement 8.5" drive wheel, free wheel and drive gear — zdjęcie 1
1 / 5

kidtrax power ride on kids toy replacement 8.5" drive wheel, free wheel and drive gear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Files include to make free wheels, drive wheels and gear adapter

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

We have a 1-wheel drive cartoon character ride on firetruck. The one wheel drive means it gets stuck on  sidewalk heaves and other uneven terrain. I decided to make it two wheel drive and upgrade the entire  system with a 12V dual drive remote control kit from amazon. 

Wheels include cutouts for nylon bearings.  I modeled the wheels to use the 12mm drive shaft/ID bearing with 20mm Diameter and 20mm long.  McMaster part number for the  bearings is 6389K771. I included a bearing stl that can be printed in nylon if desired.

Wheels have space for the traction/rubber band.  Pull the band of of a spare wheel and stretch it over this wheel.

Wheels include cutouts to accept the stock hub cap that came with the fire truck. 

Several files are included to allow making various combinations of wheel types.

  1. Complete right hand side drive wheel (need to add rubber traction band from another wheel). This drive wheel includes the drive gear, tread and wheel. Axle opening is sized for nylon bearing.

  2. Bald drive wheel.  Can be merged with treads file to create right or left hand drive wheels.  Just flip the treads before merging with the wheel to get the left hand drive wheel.

  3. Bald free wheel.  Can be merged with treads file to create right or left hand free wheels.  Just flip the treads before merging with the wheel to get the left hand free wheel.

  4. Treads for the wheel.  Merge these with a bald wheel to make it a complete wheel.

  5. Gear for drive wheel can be attached to a freewheel to make it a drive wheel.  

  6. Bearing for for 12mm drive shaft that fits the modeled wheel.  

TinkerCad and many slices include the ability to merge stl files.

I printed the wheel in PETG because it is more flexible than PLA.  ABS may be the preferred material.

Printed at 45 degree angle to avoid problems with layer adhesion in plane with the drive gear and wheel.

I used 4 wall loops, 4 top and 4 bottom layers.

10%  grid pattern infill

Not road tested by the kids yet.


Tagi