1 / 8
Christmas Tree Ornament Set Pt III: Icicle Baubles (Vase Mode Prints) — zdjęcie 1
1 / 8

Christmas Tree Ornament Set Pt III: Icicle Baubles (Vase Mode Prints)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Like normal baubles, but thinner! A fun blend of classic ornament profiles and some that might look less familiar.

Ocena
5 / 5
Polubienia
85
Pobrania
295
Wydruki
3
Wyświetlenia
978
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For my third batch of spiral vase Christmas ornaments, I thought I'd change things up a bit with some icicle baubles. Although these have a different formfactor, they're just as quick and easy to print as my bauble designs from years passed. No supports, no infill, and about 30-40 minutes to print each ornament. If you're looking for a unique decoration or gift that prints without wasting filament or time, you just found six of them!

Printing:

  • These ornaments are meant to print hollow, so enable spiral vase mode in your print settings, a few additional settings will be changed automatically when you do this.

  • If printing with a 0.4 mm nozzle, I'd recommend bumping up your perimeter extrusion width to 0.8 mm. This will increase the ornament's durability and reduce the likelihood of print failures. If you're using a 0.6 mm nozzle, default perimeters should be fine, but I'd bump mine up to 0.8 mm just to be safe.

  • For increased bed adhesion and print stability, enable your outer brim, increase your brim width to 10 mm, and reduce your brim separation gap to 0 mm.

  • I also reduce my bottom layers to 0 so my ornaments are open at the top and ready to go fresh off the print bed. Only do this if you've enabled your outer brim.

  • Remove your printed ornament from the print bed and remove the brim. Your ornament just needs a cap and a hook and it will be ready for the tree! The neck of each ornament is 1/2", and I used these ornament caps I found on Amazon. You'll also need hooks or some string or ribbon to hang them.

  • I've included a 3D printed cap and hook as well for anyone who prefers a 100% printable ornament. I prefer the look of the metal caps and hooks, but then again, better to avoid Amazon when ever possible.

  • Repeat the previous steps until your tree is sufficiently adorned.

Want some more ornaments? I have four more new bauble designs exclusively available to members of my Printables club as a thank you for their support. Subscribers to the upper tier of my Printables club ($18/month) receive commercial usage rights to all of my designs as well. They also make it possible for me to continue doing work I love, and sharing it with so many wonderful people, so big ups to them!

Bonus 2026 Ornaments

You can also still find my ornament designs from previous years. They might not be fancy and new, but I stand by them!

2022 Ornaments

2023 Ornaments

That's all, folks. Hope you like the new ornament designs, and if you print some up for your loved ones, I hope they like them as well! Drop a Make if you get a chance, I'd love to see how your ornaments turn out.

Thanks for stopping by, and if you're one of the true homies subscribed to my Printables club, double thank you, and I hope you have a wonderful holiday season! You can follow me on here or over on IG @popandsicle if you wanna keep up on any new projects I'm working on.

Tagi