Suction cup RP-SMA/SMA antenna mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket that takes three suction cups to mount an SMA antenna do a window. This type of suction cups usually…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 55
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bracket that takes three suction cups to mount an SMA antenna do a window.
This type of suction cups usually comes with replacement screens for phones as part of a little toolkit sellers send. The holes are 6mm in diameter.
You will also need an SMA or RP-SMA extension cable like this for example https://s.click.aliexpress.com/e/_c4t8V7z9 or on amazon https://amzn.to/4xpXJS9
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.
Found this 3D file useful?
You can support my work by making a purchase through one of the affiliate links below. You can buy anything you like from the store after opening the link, it doesn't have to be the products linked here. I receive a small commission from eligible purchases, at no extra cost to you. Thank you!
Amazon: https://amzn.to/4ym4rce
AliExpress: https://s.click.aliexpress.com/e/_c4SxCwcl