Road Glide Fairing Hardware Tray (1998–2013)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hardware organizer for Harley-Davidson Road Glide fairing removal.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A simple hardware organizer for Harley-Davidson Road Glide fairing removal.
I had been using a piece of paper with a drawing of the fairing to keep track of where each screw came from, so I designed this as a reusable 3D-printed version of that idea.
The shape of the organizer is inspired by the distinctive Road Glide shark-nose fairing, which also makes it easy to remember which side and location each fastener came from.
It includes locations for the outer fairing screws, windshield screws, and four acorn nuts from the lower fairing/turn-signal mounting area. The acorn nut posts can be threaded, and the screw holes are designed so the screws can lightly bite into the plastic and stay in place.
There is also a hole near the top so the organizer can be hung on a wall when not in use.
Designed around the 1998–2013 Harley-Davidson Road Glide fairing style. Hardware can vary by year and setup, so I recommend checking your fasteners before printing or modifying the design if needed.