Tektronix 2225 Oscilloscope control knob (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare trigger control knob for Tektronix 2225 Oscilloscope. Printable with 0,4mm nozzle
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 47
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare front panel knob for Tektronix 2225 oscilloscope. Used for trigger. Shoud be compatible with Holdoff, Intensity and with the different positioning knobs.
It is a remix of https://www.printables.com/model/515165-tektronix-2225-oscilloscope-control-knob
The original came out with bad print quality. Ribs are soo small they are only partially visible.
I remade the knob head for better printing quality. I increased the ribs to 0.8mm. It is now printable with a 0.4mm nozzle.
Inside connector part is the same as original. So some fileing needed before installation. Do not force it in! (Part with slit also need fileing)
Printing tip:
Pint more, like 4 pc at the same time. Part is small, it will give time for the plastic to solidify before next layer.
I used PETG.