KAROQ / ŠKODA wheel chock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel chock for 18" tires
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 495
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom-designed wheel chock specifically shaped to fit the curve of 18" wheels for Škoda Karoq. Features a hollowed-out internal structure to save material and weight while maintaining high structural strength, along with bottom grooves for better surface grip. Includes embossed "KAROQ" or "ŠKODA" text on the back.
Recommended Print Settings:
Material: PETG or ASA/ABS (for heat and outdoor durability; PLA is not recommended for outdoor/car use)
Wall Loops / Perimeters: 4–5 (crucial for structural strength)
Top/Bottom Layers: 3–5
Infill: 10%–30% (Gyroid or Cubic)
Supports: No
Safety Warning / Disclaimer
Note: This 3D-printed wheel chock is intended as an auxiliary or emergency tool for static securing. It should not be used as a primary safety device where wheel movement could cause dangerous situations, injury, or property damage. Use at your own risk.