Multifunctional touchscreen interface framework 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This can be used as a home control panel, a custom cyberdeck, a 3d print monitor etc.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Early disclaimer: I have not attempted to print this due to the lack of a framework mainboard, if people are interested in this idea, I can always extend it further and improve it, so at this state this will be presented as a proof of concept piece.
The display shown is the Waveshare 10.1 inch,which can be found cheaper elsewhere too.
The corners feature holes where heat inserts are to be pressed into, thus screwing the top bracket into the bottom part.
The hinge has been designed to feature a small piece of filament as the axis to actuate the button.
Update: added a version with holes to be mounted on a wall.
I'd recommend this to be printed in PLA , 10% infill and supports enabled.