1 / 1
Parking Card Holder for Renault Clio V (2019-2026) - Air Vent Clip — zdjęcie 1

Parking Card Holder for Renault Clio V (2019-2026) - Air Vent Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parking Card Holder that clips into the air vent of a Renault Clio V (2019-2026).

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Parking Card Holder that clips into the air vent of a Renault Clio V (2019-2026).

Keeps a parking ticket, a toll card or a business card visible and reachable instead of buried in the door pocket.

Nothing to buy - one printed part.

FITMENT

This car has rectangular vents with HORIZONTAL blades, so the clip is the sprung-jaw type: it grips a blade 1.2-3.2 mm thick and up to 16 mm deep, with friction teeth inside the jaws.

The jaw is deliberately sprung rather than a fixed slot, because real vent blades vary between cars and even between the left and right vent of the same dashboard. If it ends up tight, it is meant to be - it holds by friction and should need a firm push.

MATERIAL - THIS ONE MATTERS

Print in PETG or ASA. Not PLA. A parked car in the sun goes past 60-70 C inside, and PLA starts to soften around 55 - a PLA clip will sag off the vent, taking whatever it was holding with it. This is not a preference, it is the condition for the part working at all.

Settings: 0.2 mm layers, 4 perimeters, 30% infill, no supports. Print as oriented - the whole part is one extruded profile lying on a flat face, and the spring jaw bends in the plane of the layers, which is the only orientation that survives repeated clipping.

Not affiliated with, endorsed by, or connected to any vehicle manufacturer. Brand and model names describe fitment only.

Tagi