1 / 2
D&D Pinball Stumblor Mimic + The Pinball Scientist Claw Mod — zdjęcie 1
1 / 2

D&D Pinball Stumblor Mimic + The Pinball Scientist Claw Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a small print used to support The Pinball Scientist Claw Mod after installing the Stumblor Mimic.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I made this mod so that I could have both the Stumblor Mimic and  The Pinball Scientist Claw Mod in use at the same time. I tried to create a very subtle rocky texture and I printed it at .28 DRAFT in order to give it some shadows. It blends in pretty nicely.

The mod requires a small hex post and a self tapping screw for the claw. 

Tagi