Mini Kenwood MV7-D Speakers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini replicas of the Kenwood MV7 speakers from the 90's
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mini replica of the Kenwood MV7 speakers from the 90's, nick named “Eviction notice”. There are (2) variants for you to choose from, the normal MV7 and the upgraded MV7-D which changed the port styles to be more decorative. I also have two styles of each to choose from for each variant, one is smooth and the other is wood textured.
NOTE: the boxes pictured above are slightly different, I spray painted mine to fix a print issue I had and also I originally had the ports and horns printed separately and screwed in, but it was hard to print and took way too many screws so I simplified it by integrating these into the box body and simulating screws in the model, but if anyone wants the separate horns and ports version let me know and I can upload it for you.
PARTS LIST: ALL VALUES ARE FOR EACH BOX, DOUBLE IT IF PRINTING TWO*
(22) M2.5 x5 screws (For box back plate, speakers, TPU feet & spring terminal (only 18 screws needed if printing the alternate back with no terminals)
(8) 6x3mm Round Magnets (only needed if printing the front grill)
Stretchy speaker cloth & 3m spray glue (only needed for grill)
Optional: 2 part epoxy resin for logos (only needed if you want them to look shiny like mine, otherwise you can just print them as is. P.S I used permant “glue dots” for the adhesive to attach logos, it works great!
(4) Dayton Audio DMA70-8 2-1/2" Dual Magnet Aluminum Cone Full-Range Driver 8 Ohm
AIYIMA DC48V 10A GaN Power Supply (48v supply needed to get full power from the amp)
AMP: DAJUNGUO S600X 2.1 Channel Amplifier Board 300W+300W+600W Power Output,TPA3255 Chip,Bluetooth 5.2,Black
SPEAKER WIRING: The speakers need to be wired in parallel in each box to achive the correct ohm load for the amp.
PRINT SETTINGS:
Print slightly slower than normal for a good finish
Wood texture versions need to be printed tilted forward for the top texture to come out correctly
Smooth plate and or glue stick recommended on bed to help adhesion
The gasket parts and feet get printed in flexible filament (TPU)
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ