Thigh belt for twink legs

So basically i have a better design and i completely messed this one up wait for V2.

or let's pretend this didn't exist and it's gonna be called V1 :3


You need TPU, a rigid filament and a filament you deem sufficient for the pin, you are responsible for skin contact and allergic safety.

Ideally print the TPU band itself with a 1mm nozzle unless you change the thickness, recommended:
nozzle: 0.4 = thickness: 0.8
               .6 =                     1.2
             1.0 =                     2.0

temp: 240/80/100% fan
DRY THE TPU!!

for other parts just use 0.4

I assume the assembly itself is clear enough, you will first bend the "Belt but thing2" after heating it with anything you choose (don't burn yourself) and bending it the way the hole for the pin is located (check step, it shows the direction it will sit around the belt).
after putting it all together you will grab a soldering iron with a 3-4mm heatset insert tip, and press under the lowest ideal temp setting with force against the filament pin, and pull it away quickly after done, this will create a nice rivet like mushroom structure that will lock the filament hinge/pin thingy in place and look great, now just repeat on the other side.

I intend on turning this into an ecosystem, feel free to make changes here: onshape

next up: the weird thing that will hold it aligned with the belt but i somehow need to make it comfy and not leave an imprint on your skin oh my god...
and like possibly also make a similar thing but a triangle with geometry for attaching one of those things that go down to hold your sock up, or even the thing fully integrated! y not :3
(roadmap has no dates and no guarantees)

okay incoherent rambling is over