Meso Customs LED light deffusers 3rd gen Tacoma
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
light diffusers made for meso customs interior light kit for the 3rd gen tacoma
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I really liked the idea of being able to toggle all the lights in my car between white and red, just didn't like how bright the MESO customs lights were when on...
I designed these specifically around the 3rd gen Tacoma dome and map lights made by MESO customs found here (Dome Light) (Map Light)
I can't verify if these work for other MESO customs products, they're form fitting currently (I used a 3d scanner to get the get the curves as close as I could)
I printed mine using Overture Transparent PETG using concentric top, bottom, and infill at 100% because thought any less I thought was too bright. That said if you decide to print at lower infills the patterns do give pretty cool effects.
I used 3m double sided tape and trimmed it back to adhere the 3d prints to the LED, I also installed these after going through the process of installing the LEDs, unsure how these effect the install process if put on first.
Designed these to print without supports flat side down (side you see down on print bed)